dmesg - Radxa Rock Pro
Initializing cgroup subsys cpu
Linux version 3.0.36+ (root@utopic) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jan 26 13:50:16 UTC 2015
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: RK30board
ddr size = 2048 M, set ion_reserve_size size to 125829120
memory reserve: Memory(base:0x98800000 size:120M) reserved for
memory reserve: Memory(base:0x97000000 size:24M) reserved for
memory reserve: Memory(base:0x96800000 size:8M) reserved for
memory reserve: Total reserved 152M
Memory policy: ECC disabled, Data cache writeback
bootconsole [earlycon0] enabled
CPU SRAM: copied sram code from c0c1d000 to fef00100 - fef02088
CPU SRAM: copied sram data from c0c1ef88 to fef02088 - fef02800
sram_log: 4q ?& : 4q ?) !?, # 0q *! ! 3q @ 3q
CLKDATA_MSG: pll_flag = 0x00
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
DDR DEBUG: version 1.00 20131106
DDR DEBUG: DDR3 Device
DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Total Capability=2048MB
DDR DEBUG: init success!!! freq=300MHz
DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x1b, DGSL=1 extra clock, DGPS=360
DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x23, DGSL=1 extra clock, DGPS=360
DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x1b, DGSL=1 extra clock, DGPS=360
DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x1b, DGSL=1 extra clock, DGPS=360
DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
On node 0 totalpages: 485376
free_area_init_node: node 0, pgdat c0c1ac40, node_mem_map c2500000
Normal zone: 976 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 123952 pages, LIFO batch:31
HighMem zone: 3120 pages used for memmap
HighMem zone: 357328 pages, LIFO batch:31
PERCPU: Embedded 7 pages/cpu @c350d000 s7040 r8192 d13440 u32768
pcpu-alloc: s7040 r8192 d13440 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 481280
Kernel command line: console=ttyFIQ0,115200 console=tty0 root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init mac_addr=de:ad:de:ad:be:ef initrd=0x62000000,0x00500000 mtdparts=rk29xxnand:0x00008000@0x00002000(boot),-@0x0000A000(linuxroot) bootver=2013-12-27#2.10 firmware_ver=4.2.2
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 872MB 1024MB = 1896MB total
Memory: 1891924k/1891924k available, 205228k reserved, 1441792K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xff600000 - 0xffe00000 ( 8 MB)
vmalloc : 0xdf000000 - 0xfe800000 ( 504 MB)
lowmem : 0xc0000000 - 0xde800000 ( 488 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0408000 - 0xc043d000 ( 212 kB)
.text : 0xc043d000 - 0xc0b99b44 (7539 kB)
.data : 0xc0b9a000 - 0xc0c1cbc8 ( 523 kB)
.bss : 0xc0c20024 - 0xc16d9cc8 (10984 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:352
rk30_gpio_init: 128 gpio irqs in 4 banks
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
rk_timer: version 1.3
Console: colour dummy device 80x30
console [tty0] enabled, bootconsole disabled
Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
CPU1: Booted secondary processor
CPU2: Booted secondary processor
CPU3: Booted secondary processor
Brought up 4 CPUs
SMP: Total of 4 processors activated (6525.87 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
last_log: 0xde100000 map to 0xdf004000 and copy to 0xc0c241e0 (version 2.1)
lcdc0 is used as primary display device contoller!
lcdc1 is used as primary display device controller!
rk29sdk_wifi_bt_gpio_control_init: request wifi power gpio failed
console [ttyFIQ0] enabled
Registered FIQ tty driver de03ecc0
Loaded driver for PL330 DMAC-1 rk29-pl330
DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
Loaded driver for PL330 DMAC-2 rk29-pl330
DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
rk29xx_spim: driver initialized, fifo_len=32,bus_num=0
rk29xx_spim: driver initialized, fifo_len=32,bus_num=1
bio: create slab at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
rk30-adc rk30-adc: rk30 adc: driver initialized
timed-gpio: probe of timed-gpio failed with error -22
Advanced Linux Sound Architecture Driver Version 1.0.24.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
rk fb probe ok!
act8846_set_init,line=17
act8846_set_init:g_pmic_type=3
act8846_set_init act_dcdc1 =1200000mV end
act8846_set_init vdd_core =1000000mV end
act8846_set_init vdd_cpu =1000000mV end
act8846_set_init act_dcdc4 =3000000mV end
act8846_set_init act_ldo1 =1000000mV end
act8846_set_init act_ldo2 =1200000mV end
act8846_set_init act_ldo3 =1800000mV end
act8846_set_init act_ldo4 =3300000mV end
act8846_set_init act_ldo5 =3300000mV end
act8846_set_init act_ldo6 =3300000mV end
act8846_set_init act_ldo7 =1800000mV end
act8846_set_init act_ldo8 =2800000mV end
act8846_set_init,line=78 END
i2c-core: driver [act8846] using legacy suspend method
i2c-core: driver [act8846] using legacy resume method
rk1000_control_probe
rk1000_control_probe ok
cfg80211: Calling CRDA to update world regulatory domain
rk616 2-0050: rk616 core probe success!
Switching to clocksource rk_timer
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #2
Switched to NOHz mode on CPU #3
Switched to NOHz mode on CPU #1
use lcdc1 and jetta implemention dual display!
lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xdf0b4000
fb0:win0
fb1:win1
fb2:win2
rk3188 lcdc1 clk enable...
rk3188 lcdc1 clk disable...
fb0:phy:97000000>>vir:e0000000>>len:0x1800000
rk_fb_register>>>>>fb0
rk_fb_register>>>>>fb1
rk3188 lcdc1 clk enable...
lcdc1: dclk:148500000>>fps:60
rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!
lcdc1 wakeup from standby!
lcdc1 win0 open,atv layer:1
rk3188 lcdc1 probe ok!
rk616-lvds rk616-lvds: rk616 lvds probe success!
1953..sdmmc_is_selected_emmc: RK SDMMC is not setted to support eMMC.
rk29_sdmmc_probe: internal_storage is NOT emmc.
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
RK29 Backlight Driver Initialized.
Unpacking initramfs...
Initramfs unpacking failed: junk in compressed archive
Freeing initrd memory: 5120K
PMU: registered new PMU device of type 0
efuse_version_val: efuse version = 51
DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 10000
adjust table freq=1608000 KHz, index=1350000 mV to index=1300000 mV
efuse_version_val: efuse version = 51
DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 10000
rk3188 cpufreq version 2.2, suspend freq 816 MHz
VPU_SERVICE: failed on clk_get pd_video
VPU_SERVICE: failed on clk_get aclk_ddr_vepu
VPU_SERVICE: failed on clk_get hclk_cpu_vcodec
vpu: power on
VPU_SERVICE: checking hw id 4831
vpu: power off...done
VPU_SERVICE: init success
audit: initializing netlink socket (disabled)
type=2000 audit(2.090:1): initialized
highmem bounce pool size: 64 pages
ashmem: initialized
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.16)
msgmni has been set to 889
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
rga: Driver loaded succesfully
rk_serial.c v1.6 2013-12-23
rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
rk_serial rk_serial.0: membase 0xdf0c4000
rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
rk_serial rk_serial.3: membase 0xdf0c8000
Rockchip ion module(version: 1.0) is successfully loaded
loop: module loaded
Android kernel panic handler initialized (bind=kpanic)
Read the Ethernet MAC address from IDB:00:00:00:00:00:00
random_ether_addr***********:FA:71:56:C1:7F:B
eth mac from kernel cmdline: DE:AD:DE:AD:BE:EF
rk29 vmac rk29 vmac.0: ARC VMAC at 0x10204000 irq 51 de:ad:de:ad:be:ef
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
Rockchip WiFi SYS interface (V1.00) ...
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
usb20_otg usb20_otg: DWC OTG Controller
usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
usb20_otg usb20_otg: irq 48, io mem 0x00000000
DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
usb usb1: SerialNumber: usb20_otg
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xdf180000
DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
usb20_host usb20_host: DWC OTG Controller
usb20_host usb20_host: new USB bus registered, assigned bus number 2
usb20_host usb20_host: irq 49, io mem 0x00000000
DWC_OTG: Init: Port Power? op_state=1
DWC_OTG: Init: Power Port (0)
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: DWC OTG Controller
usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
usb usb2: SerialNumber: usb20_host
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
g_mass_storage gadget: Mass Storage Function, version: 2009/09/11
g_mass_storage gadget: Number of LUNs=1
lun0: LUN: removable file: (no medium)
g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
g_mass_storage gadget: userspace failed to provide iSerialNumber
g_mass_storage gadget: g_mass_storage ready
input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
===================================================
Rockchip IR remote controller driver. Version 1.0.0
===================================================
++++++++remotectl_init
remotectl probe j=0x0
remotectl probe j=0x1
remotectl probe j=0x2
remotectl probe j=0x3
remotectl probe j=0x4
remotectl probe j=0x5
input: rkxx-remotectl as /devices/platform/rkxx-remotectl/input/input1
using rtc device, rtc_hym8563, for alarms
rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 251
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR LIRC bridge handler initialized
Linux video capture interface: v2.00
def_ref_volt: 1800mV, curr_ref_volt: 1800mV
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
.Line4018..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sd_mmc]
Skipping unavailable LED gpio -1 (button-backlight)
Registered led device: green
Registered led device: blue
Registered led device: red
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drivers/mmc/core/core.c...2019.. ===== mmc_rescan Begin....[mmc0]
=================
sdmmc_rescan..2026.. ====find no SDMMC host. [mmc0]
logger: created 256K log 'log_main'
logger: created 256K log 'log_events'
logger: created 256K log 'log_radio'
logger: created 256K log 'log_system'
zram: Created 1 device(s) ...
MTVAP IRQ 7 busy
snd_mtpav: probe of snd_mtpav failed with error -16
Error: Driver 'rk1000_control' is already registered, aborting...
rk1000_codec_modinit::929
rk1000_codec_i2c_probe::881
Enter::audio_card_init----111
rk1000_codec_probe::820
Enter-rk1000_codec_write::reg=0x1D, value=0x00
Enter-rk1000_codec_write::reg=0x17, value=0xFF
Enter-rk1000_codec_write::reg=0x18, value=0xFF
Enter-rk1000_codec_write::reg=0x19, value=0xFF
Enter-rk1000_codec_write::reg=0x1F, value=0xDF
Enter-rk1000_codec_write::reg=0x1F, value=0x5F
Enter-rk1000_codec_write::reg=0x19, value=0x7F
Enter-rk1000_codec_write::reg=0x15, value=0xC1
Enter-rk1000_codec_write::reg=0x1A, value=0x1C
usb 2-1: new high speed USB device number 2 using usb20_host
Enter-rk1000_codec_write::reg=0x1F, value=0x09
Enter-rk1000_codec_write::reg=0x1E, value=0x00
Enter-rk1000_codec_write::reg=0x1A, value=0x14
Enter-rk1000_codec_write::reg=0x1D, value=0xFE
Enter-rk1000_codec_write::reg=0x17, value=0xBF
Enter-rk1000_codec_write::reg=0x18, value=0xBF
Enter-rk1000_codec_write::reg=0x19, value=0x7F
Enter-rk1000_codec_write::reg=0x1F, value=0xDF
Enter-rk1000_codec_write::reg=0x04, value=0x03
Enter-rk1000_codec_write::reg=0x0A, value=0x01
Enter-rk1000_codec_write::reg=0x09, value=0x42
Enter-rk1000_codec_write::reg=0x00, value=0x2D
Enter-rk1000_codec_write::reg=0x05, value=0x0E
Enter-rk1000_codec_write::reg=0x06, value=0x42
Enter-rk1000_codec_write::reg=0x07, value=0x0E
Enter-rk1000_codec_write::reg=0x08, value=0x42
Enter-rk1000_codec_write::reg=0x0C, value=0x90
Enter-rk1000_codec_write::reg=0x0D, value=0x10
Enter-rk1000_codec_write::reg=0x0E, value=0x10
Enter-rk1000_codec_write::reg=0x12, value=0xEC
Enter-rk1000_codec_write::reg=0x13, value=0x50
Enter-rk1000_codec_write::reg=0x14, value=0x50
Enter-rk1000_codec_write::reg=0x0B, value=0x00
Enter-rk1000_codec_write::reg=0x15, value=0x01
Enter-rk1000_codec_write::reg=0x1B, value=0x32
Enter-rk1000_codec_write::reg=0x1C, value=0x80
Enter-rk1000_codec_write::reg=0x17, value=0xBF
Enter-rk1000_codec_write::reg=0x18, value=0xBF
Enter-rk1000_codec_write::reg=0x1D, value=0x7E
Enter-rk1000_codec_write::reg=0x1E, value=0xC0
Enter-rk1000_codec_write::reg=0x1F, value=0xD9
Enter-rk1000_codec_write::reg=0x0B, value=0x02
Enter-rk1000_codec_write::reg=0x15, value=0xC1
Enter-rk1000_codec_write::reg=0x0C, value=0x90
Enter-rk1000_codec_write::reg=0x0D, value=0x10
Enter-rk1000_codec_write::reg=0x0E, value=0x10
Enter-rk1000_codec_write::reg=0x12, value=0xEC
Enter-rk1000_codec_write::reg=0x13, value=0x00
Enter-rk1000_codec_write::reg=0x14, value=0x00
Enter-rk1000_codec_write::reg=0x1C, value=0x80
asoc: rk1000_codec rk29_i2s.1 mapping ok
audio_card_init end....
ALSA device list:
#0: Dummy 1
#1: Loopback 1
#2: Virtual MIDI Card 1
#3: RK29_RK1000
GACT probability NOT on
Mirror/redirect action on
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
Mobile IPv6
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB2.0 Hub
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
NET: Registered protocol family 35
[BT_RFKILL]: Enter rfkill_rk_init
[BT_RFKILL]: Request irq for bt wakeup host
[BT_RFKILL]: ** disable irq
[BT_RFKILL]: bt shut off power
[BT_RFKILL]: bt_default device registered.
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Registering SWP/SWPB emulation handler
rk_cam_cif(3361):rk3066b-camera version: v0.3.25 Zoom by ipp
ddrfreq: verion 3.2 20131126
ddrfreq: fix cpu pause bug
ddrfreq: normal 396MHz video 300MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 198MHz reboot 300MHz
ret: 0
usb 2-1.1: new high speed USB device number 3 using usb20_host
ddrfreq: change freq to 396 MHz when normal
ret: 0
rk616-hdmi rk616-hdmi.1: rk616 hdmi probe success.
rtc_hym8563 1-0051: setting system clock to 2015-02-11 19:19:13 UTC (1423682353)
asoc: dit-hifi rk-spdif mapping ok
Freeing init memory: 212K
min_w = 800,min_h = 600 ,max_real_w = 2592,max_real_h = 1944,max_w = 2592,max_h =1944
i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...
i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...
i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...
ov5640_back_3(rk_cam_sensor:167): write reg(0x3008, val:0x80) failed, try to write again!
i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...
i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...
rk30_i2c rk30_i2c.3: Addr[0x3c] no mbtf irq in STATE_WRITE
rk30_i2c rk30_i2c.3: i2c->clk = 75000000
rk30_i2c rk30_i2c.3: i2c->start = 4
rk30_i2c rk30_i2c.3: I2C_CON: 0x00000031
rk30_i2c rk30_i2c.3: I2C_CLKDIV: 0x002f002f
rk30_i2c rk30_i2c.3: I2C_MRXADDR: 0x00000000
rk30_i2c rk30_i2c.3: I2C_MRXRADDR: 0x00000000
rk30_i2c rk30_i2c.3: I2C_MTXCNT: 0x00000004
rk30_i2c rk30_i2c.3: I2C_MRXCNT: 0x00000000
rk30_i2c rk30_i2c.3: I2C_IEN: 0x00000020
rk30_i2c rk30_i2c.3: I2C_IPD: 0x00000001
rk30_i2c rk30_i2c.3: I2C_FCNT: 0x00000002
rk30_i2c rk30_i2c.3: I2C_TXDATA0: 0x80083078
rk30_i2c rk30_i2c.3: I2C_TXDATA1: 0x00000000
rk30_i2c rk30_i2c.3: I2C_TXDATA2: 0x00000000
rk30_i2c rk30_i2c.3: I2C_TXDATA3: 0x00000000
rk30_i2c rk30_i2c.3: I2C_TXDATA4: 0x00000000
rk30_i2c rk30_i2c.3: I2C_TXDATA5: 0x00000000
rk30_i2c rk30_i2c.3: I2C_TXDATA6: 0x00000000
rk30_i2c rk30_i2c.3: I2C_TXDATA7: 0x00000000
rk30_i2c rk30_i2c.3: I2C_RXDATA0: 0x00000000
rk30_i2c rk30_i2c.3: I2C_RXDATA1: 0x00000000
rk30_i2c rk30_i2c.3: I2C_RXDATA2: 0x00000000
rk30_i2c rk30_i2c.3: I2C_RXDATA3: 0x00000000
rk30_i2c rk30_i2c.3: I2C_RXDATA4: 0x00000000
rk30_i2c rk30_i2c.3: I2C_RXDATA5: 0x00000000
rk30_i2c rk30_i2c.3: I2C_RXDATA6: 0x00000000
rk30_i2c rk30_i2c.3: I2C_RXDATA7: 0x00000000
usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0724
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: 802.11n WLAN Adapter
usb 2-1.1: Manufacturer: Realtek
usb 2-1.1: SerialNumber: 00e04c000001
ov5640_back_3(rk_cam_sensor:167): write reg(0x3008, val:0x80) failed, try to write again!
i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...
i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...
i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...
ov5640_back_3(rk_cam_sensor:167): write reg(0x3008, val:0x80) failed, try to write again!
ov5640_back_3(rk_cam_sensor:383): write array failed!
ov5640_back_3(rk_cam_sensor:689): soft reset failed
i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 2...
i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 1...
i2c i2c-3: No ack, Maybe slave(addr: 0x3c) not exist or abnormal power-on, retry 0...
ov5640_back_3(rk_cam_sensor:333): read reg(0x300a val:0x0) failed, try to read again!
ov5640_back_3(rk_cam_sensor:716): read chip id failed
ret: 0
Console: switching to colour frame buffer device 240x67
camera 33-0-ov5640_back_3: Probe ov5640_back_3 failed
ret: 0
ret: 0
min_w = 800,min_h = 600 ,max_real_w = 1600,max_real_h = 1200,max_w = 1600,max_h =1200
i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
ov2659_front_4(rk_cam_sensor:167): write reg(0x103, val:0x1) failed, try to write again!
i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
ov2659_front_4(rk_cam_sensor:167): write reg(0x103, val:0x1) failed, try to write again!
i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
ov2659_front_4(rk_cam_sensor:167): write reg(0x103, val:0x1) failed, try to write again!
ov2659_front_4(rk_cam_sensor:383): write array failed!
ov2659_front_4(rk_cam_sensor:689): soft reset failed
i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
ov2659_front_4(rk_cam_sensor:333): read reg(0x300a val:0x0) failed, try to read again!
ov2659_front_4(rk_cam_sensor:716): read chip id failed
ret: 0
camera 33-1-ov2659_front_4: Probe ov2659_front_4 failed
gp_rknand_info = : 0xdd4d5100
rk30_chip_set:1
FtlInit!
No.1 FLASH ID:2c 64 44 4b a9 0
FTL version: 5.0.18 20141015
gBootMedia = 1 gSdmmcFwPartOffset =0!
rknand_buffer.c version: 4.40 20130830!
2 cmdlinepart partitions found on MTD device rk29xxnand
Creating 2 MTD partitions on "rk29xxnand":
0x000000400000-0x000001400000 : "boot"
0x000001400000-0x0001df400000 : "linuxroot"
udevd[113]: starting version 175
EXT4-fs (mtdblock1): recovery complete
EXT4-fs (mtdblock1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'arm'.
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Set hostname to .
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Expecting device dev-ttyFIQ0.device...
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Paths.
systemd[1]: Reached target Paths.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting system-openvpn.slice.
systemd[1]: Created slice system-openvpn.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-serial\x2dgetty.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-journald[242]: Failed to register hostname fd in event loop: Operation not permitted. Ignoring.
systemd-udevd[250]: starting version 215
rtk_btusb: Realtek Bluetooth USB driver ver 0.8
rtk_btusb: btusb_probe 1==========can_wakeup=1 flag2=0
rtk_btusb: wakeup_disable==========can_wakeup=1 flag2=0
rtk_btusb: patch_add
usbcore: registered new interface driver rtk_btusb
rtk_btusb: btusb_open start pm_usage_cnt(0x0)
rtk_btusb: btusb_open hdev->promisc ==0
rtk_btusb: download_patch start
rtk_btusb: check_fw_version : read_ver_rsp->lmp_subver = 0x1200
rtk_btusb: load_firmware
usbcore: registered new interface driver rtl8723au
rtk_btusb: check_fw_version : read_ver_rsp->lmp_subver = 0x342e
rtk_btusb: Rtk patch end 0
rtk_btusb: btusb_open end pm_usage_cnt(0x0)
rtk_btusb: btusb_notify : hci0 evt 3
[BT_RFKILL]: bt shut off power
rtk_btusb: btusb_flush add delay
rtk_btusb: btusb_close
enter func vmac_open...
power on phy
vmac_mii_bus: probed
rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
ADDRCONF(NETDEV_UP): eth0: link is not ready
PHY: 0:00 - Link is Down
PHY: 0:00 - Link is Up - 100/Full
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm] Initialized drm 1.1.0 20060810
UMP: UMP device driver loaded
DRM: mali_platform_drm_probe()
mali_drm_init(), driver name: mali_drm, version 0.1
DRM: mali_driver_load()
[drm] Initialized mali_drm 0.1.0 20100520 on minor 0
Mali: init_mali_clock mali_clock c0bb1d18
Mali: Mali device driver loaded
systemd-journald[242]: Received request to flush runtime journal from PID 1
rk30-lcdc rk30-lcdc.1: blank mode:1